NAVY 5252.223-9000 DON ADDITIONAL SAFETY REQUIREMENTS APPLICABLE TO SPECIFIED GOVERNMENT FURNISHED AMMUNITION AND EXPLOSIVES Basic (OCT 1997) (Current)

This clause has not been authorized for official release. We recommend deferring to the text of the clause in your RFP or contract.
As prescribed at 5223.370-5, use the clause at 5252.223-9000, DON ADDITIONAL SAFETY REQUIREMENTS APPLICABLE TO SPECIFIED GOVERNMENT FURNISHED AMMUNITION AND EXPLOSIVES, in solicitations and contracts that: 

(1) contain the clause at DFARS 252.223-7002; and

(2) provide as GFM any A&E containing nitrocellulose-based propellants and/or nitrate ester-based materials (such as nitroglycerin,) or other similar A&E with a tendency to become chemically unstable over time;

DON ADDITIONAL SAFETY REQUIREMENTS APPLICABLE TO SPECIFIED GOVERNMENT FURNISHED AMMUNITION AND EXPLOSIVES (OCT 1997) 

The following additional safety requirements apply to Government Furnished Material (GFM) Ammunition and Explosives (A&E) containing nitrocellulose-based propellants and/or nitrate ester-based materials (such as nitroglycerin,) or such other similar A&E provided as GFM and designated by the Contracting Officer which have a tendency to become chemically unstable over time:

(a) The Contractor shall maintain inventory control records of potentially unstable GFM A&E by National Stock Number (NSN) or part number, lot number, nomenclature, storage location, quantity and date of receipt.

(b) The Contractor shall comply with any Government notice concerning any restrictions, suspensions and limitations imposed by the cognizant Government component on GFM A&E to ensure that the materials are safe for continued storage.

(c) Upon receipt of a notice from the Government of reclassification actions taken by the Government that render GFM A&E unserviceable, suspended or restricted, the Contractor shall immediately follow the instructions contained within the notice.

(d) When directed by the Government, the Contractor shall ship samples of GFM A&E in its possession to the Government testing facilities. GFM A&E samples will be shipped with the Contract Number, NSN or part number, lot number, nomenclature and quantity clearly marked on the Bill of Lading. Failure to comply may result in rejection and/or disposal of the material at the destination at the expense of the Contractor. Any costs associated with the rejection and/or disposal of non-compliant or unauthorized shipments shall be borne by the Contractor.

(e) Within 30 days of completion or termination of the contract, the Contractor shall request disposition instructions from the Contracting Officer for any residual, unserviceable, suspended or restricted GFM A&E. The Contracting Officer shall provide disposition instructions to the Contractor not later than 90 days after they are requested.

(f) If disposition instructions direct shipment to a Government disposal or storage activity, the Contractor shall obtain verification of the contents and marking by the contract administration office Quality Assurance Representative prior to shipment. Additionally, the Contractor shall notify the receiving activity 30 days prior to shipment and provide a detailed list of GFM A&E being returned. Returned materials will be shipped with the Contract Number, NSN or part number, lot number, nomenclature and quantity clearly marked. Failure to comply may result in rejection and/or disposal of the material at the destination at the expense of the Contractor. Any costs associated with the rejection and/or disposal of non-compliant or unauthorized shipments shall be borne by the Contractor.

(g) If the Contractor has the capability to dispose of these materials at its facility and has been instructed to do so through disposition instructions, the Contractor shall provide written notice to the Contracting Officer identifying the materials it is disposing of by the Contract Number, NSN or part number, lot number, nomenclature and quantity, and the date the disposition of the materials was accomplished.

(h) If direction issued under the clause causes an increase in the cost of performance under this contract, the Contracting Officer shall make an equitable adjustment in the contract price.

NONE

Prime’s Interest;
⚠ =252.223-7002 Basic

52.223-11 Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons.

52.223-3 Hazardous Material Identification and Material Safety Data.

52.223-7 Notice of Radioactive Materials.

52.250-1 Indemnification Under Public Law 85-804.

52.250-3 SAFETY Act Block Designation/Certification.

52.250-4 SAFETY Act Pre-qualification Designation Notice.

52.250-5 SAFETY Act-Equitable Adjustment.

52.223-22 Public Disclosure of Greenhouse Gas Emissions and Reduction Goals-Representation.

252.223-7001 Hazard Warning Labels.

252.223-7002 Safety Precautions for Ammunition and Explosives.

252.223-7003 Change in Place of Performance--Ammunition and Explosives.

252.223-7006 Prohibition on Storage, Treatment, and Disposal of Toxic or Hazardous Materials.

252.223-7007 Safeguarding Sensitive Conventional Arms, Ammunition, and Explosives.

252.223-7008 Prohibition of Hexavalent Chromium.

252.225-7009 Restriction on Acquisition of Certain Articles Containing Specialty Metals.

252.225-7052 Restriction on the Acquisition of Certain Magnets, Tantalum, and Tungsten.

252.223-7009 Prohibition of Procurement of Fluorinated Aqueous Film-Forming Foam Fire-Fighting Agent for Use on Military Installations

5252.223-9501 MATERIAL SAFETY DATA SHEET (MSDS)(NAVAIR)

3052.223-70 Removal or disposal of hazardous substances – applicable licenses and permits

3052.223-90 Accident and fire reporting (USCG).

5352.223-9000 Elimination of Use of Class I Ozone Depleting Substances (ODS)

5352.223-9001 Health and Safety on Government Installations

552.223-70 Hazardous Substances.

552.223-71 Nonconforming Hazardous Materials.

552.223-72 Hazardous Material Information.

552.223-73 Preservation, Packaging, Packing, Marking, and Labeling of Hazardous Materials (HAZMAT) For Shipments.

652.236-70 Accident Prevention.

1452.236-70 Prohibition Against Use of Lead-based Paint.

952.223-78 Sustainable acquisition program.

952.225-70 Subcontracting for nuclear hot cell services.

970.5223-1 Integration of environment, safety, and health into work planning and execution.

952.204-73 Facility clearance.

952.223-71 Integration of environment, safety, and health into work planning and execution.

952.223-72 Radiation protection and nuclear criticality.

952.223-75 Preservation of individual occupational radiation exposure records.

Working with a set of FAR clauses from an RFP or contract?

Try pasting them into our tool to instantly generate a risk profile, including the basic flow down recommendation.

Info

Works best with Chrome and Edge browsers!