FAR 52.250-3 SAFETY Act Block Designation/Certification. Alt II (Feb 2009) (Current)

As prescribed in 50.206(b),

 (1) Insert the provision at 52.250-3, SAFETY Act Block Designation/Certification, in a solicitation when DHS has issued a block designation/certification for the solicited technologies.

    (2) Use the provision at 52.250-3 with its Alternate I when contingent offers are authorized in accordance with 50.205-3.

    (3) Use the provision at 52.250-3 with its Alternate II when offers presuming SAFETY Act designation or certification are authorized in accordance with 50.205-4. If this alternate is used, the contracting officer may increase the number of days within which offerors must submit their SAFETY Act designation or certification application.

SAFETY Act Block Designation/Certification Alternate II (Feb 2009)

(a) Definitions. As used in this provision—

“Act of terrorism” means any act determined to have met the following requirements or such other requirements as defined and specified by the Secretary of Homeland Security:

    (1) Is unlawful.

    (2) Causes harm, including financial harm, to a person, property, or entity, in the United States, or in the case of a domestic United States air carrier or a United States-flag vessel (or a vessel based principally in the United States on which United States income tax is paid and whose insurance coverage is subject to regulation in the United States), in or outside the United States.

    (3) Uses or attempts to use instrumentalities, weapons or other methods designed or intended to cause mass destruction, injury or other loss to citizens or institutions of the United States.

“Block certification” means SAFETY Act certification of a technology class that the Department of Homeland Security (DHS) has determined to be an approved class of approved products for homeland security.

“Block designation” means SAFETY Act designation of a technology class that the DHS has determined to be a Qualified Anti-Terrorism Technology (QATT).

“Qualified Anti-Terrorism Technology (QATT)” means any technology designed, developed, modified, procured, or sold for the purpose of preventing, detecting, identifying, or deterring acts of terrorism or limiting the harm such acts might otherwise cause, for which a SAFETY Act designation has been issued. For purposes of defining a QATT, technology means any product, equipment, service (including support services), device, or technology (including information technology) or any combination of the foregoing. Design services, consulting services, engineering services, software development services, software integration services, threat assessments, vulnerability studies, and other analyses relevant to homeland security may be deemed a technology.

“SAFETY Act certification” means a determination by DHS pursuant to 6 U.S.C. 442(d), as further delineated in 6 CFR 25.9, that a QATT for which a SAFETY Act designation has been issued is an approved product for homeland security, i.e., it will perform as intended, conforms to the seller’s specifications, and is safe for use as intended.

“SAFETY Act designation” means a determination by DHS pursuant to 6 U.S.C. 441(b) and 6 U.S.C. 443(a) , as further delineated in 6 CFR 25.4, that a particular Anti-Terrorism Technology constitutes a QATT under the SAFETY Act.

(b) The Support Anti-terrorism by Fostering Effective Technologies Act of 2002 (SAFETY Act), 6 U.S.C. 441-444, creates certain liability limitations for claims arising out of, relating to, or resulting from an act of terrorism where QATTs have been deployed. It also confers other important benefits. SAFETY Act designation and SAFETY Act certification are designed to support effective technologies aimed at preventing, detecting, identifying, or deterring acts of terrorism, or limiting the harm that such acts might otherwise cause, and which also meet other prescribed criteria. For some classes of technologies, DHS may issue a block designation/certification in order to lessen the burdens for filing for SAFETY Act designation or SAFETY Act certifications by not requiring applicants to provide certain information otherwise required and in order to offer expedited review of any application submitted pursuant to a block designation/certification. Block designations/certifications will be issued only for technologies that rely on established performance standards or defined technical characteristics.

(c)(1) DHS has issued a block designation or block certification for the technology to be acquired under this solicitation.

    (2) This block designation or block certification is attached to this solicitation and contains essential information, including—

        (i) A detailed description of and specification for the technology covered by the block designation or block certification;

        (ii) A listing of those portions of the SAFETY Act application kit that must be completed and submitted by applicants;

        (iii) The date of its expiration; and

        (iv) Any other terms and conditions.

    (3) Offerors should read this block designation or block certification carefully to make sure they comply with its terms if they plan to take advantage of SAFETY Act coverage for their technology(ies).

(d) All determinations by DHS are based on factors set forth in the SAFETY Act and its implementing regulations. A determination by DHS to issue a SAFETY Act designation, or not to issue a SAFETY Act designation for a particular technology as a QATT is not a determination that the technology meets, or fails to meet, the requirements of any solicitation issued by any Federal, State, local or tribal governments. Determinations by DHS with respect to whether to issue a SAFETY Act designation for technologies submitted for DHS review are based on the factors identified in 6 CFR 25.4(b).

(e) Neither SAFETY Act designation nor certification is in any way a requirement of this action. Whether to seek the benefits of the SAFETY Act for a proposed product or service is entirely up to the offeror. Additional information about the SAFETY Act and this block designation/certification may be found at the SAFETY Act website at http://www.SAFETYAct.gov or requests may be mailed to:

Directorate of Science and Technology 
SAFETY Act/Room 4320 
Department of Homeland Security 
Washington, DC 20528

(f)(1) Offerors are authorized to submit offers presuming that SAFETY Act designation (or SAFETY Act certification, if a block certification exists) will be obtained before or after award.

    (2) An offeror is eligible for award only if the offeror—

        (i) Files a SAFETY Act designation (or SAFETY Act certification) application, limited to the scope of the applicable block designation (or block certification), within 15 days after submission of the proposal;

        (ii) Pursues its SAFETY Act designation (or SAFETY Act certification) application in good faith; and

        (iii) Agrees to obtain the amount of insurance DHS requires for issuing the offeror’s SAFETY Act designation (or SAFETY Act certification).

    (3) If DHS has not issued a SAFETY Act designation (or SAFETY Act certification) to the successful offeror before contract award, the contracting officer will include the clause at 52.250-5 in the resulting contract.

(End of provision)


52.208-8 Required Sources for Helium and Helium Usage Data.

52.223-11 Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons.

52.223-17 Affirmative Procurement of EPA-designated Items in Service and Construction Contracts.

52.223-3 Hazardous Material Identification and Material Safety Data.

52.223-7 Notice of Radioactive Materials.

52.250-1 Indemnification Under Public Law 85-804.

52.250-4 SAFETY Act Pre-qualification Designation Notice.

52.250-5 SAFETY Act-Equitable Adjustment.

52.223-22 Public Disclosure of Greenhouse Gas Emissions and Reduction Goals-Representation.

252.223-7001 Hazard Warning Labels.

252.223-7002 Safety Precautions for Ammunition and Explosives.

252.223-7003 Change in Place of Performance--Ammunition and Explosives.

252.223-7006 Prohibition on Storage, Treatment, and Disposal of Toxic or Hazardous Materials.

252.223-7007 Safeguarding Sensitive Conventional Arms, Ammunition, and Explosives.

252.223-7008 Prohibition of Hexavalent Chromium.

252.225-7009 Restriction on Acquisition of Certain Articles Containing Specialty Metals.

252.225-7052 Restriction on the Acquisition of Certain Magnets, Tantalum, and Tungsten.



3052.223-70 Removal or disposal of hazardous substances – applicable licenses and permits

3052.223-90 Accident and fire reporting (USCG).

5352.223-9000 Elimination of Use of Class I Ozone Depleting Substances (ODS)

5352.223-9001 Health and Safety on Government Installations

552.223-70 Hazardous Substances.

552.223-71 Nonconforming Hazardous Materials.

552.223-72 Hazardous Material Information.

552.223-73 Preservation, Packaging, Packing, Marking, and Labeling of Hazardous Materials (HAZMAT) For Shipments.

652.236-70 Accident Prevention.

1452.236-70 Prohibition Against Use of Lead-based Paint.

952.223-78 Sustainable acquisition program.

952.225-70 Subcontracting for nuclear hot cell services.

970.5223-7 Sustainable acquisition program.

970.5223-1 Integration of environment, safety, and health into work planning and execution.

952.204-73 Facility clearance.

952.223-71 Integration of environment, safety, and health into work planning and execution.

952.223-72 Radiation protection and nuclear criticality.

952.223-75 Preservation of individual occupational radiation exposure records.

Working with a set of FAR clauses from an RFP or contract?

Try pasting them into our tool to instantly generate a risk profile, including the basic flow down recommendation.


Works best with Chrome and Edge browsers!