NASA 1852.227-70 New Technology-Other than a Small Business Firm or Nonprofit Organization. Basic (APR 2015)

As prescribed in 1827.303(d)(1), the contracting officer shall insert the clause at 1852.227-70, New Technology-Other than a Small Business Firm or Nonprofit Organization, in all NASA solicitations and contracts with other than a small business firm or a nonprofit organization (i.e., those subject to section 21035(b) of the Act), if the contract is to be performed in the United States, and has as a purpose the performance of experimental, developmental, research, design, or engineering work. Contracts for any of the following purposes may be considered to involve the performance of work of the type described above (these examples are illustrative and not all inclusive):

(i) Conduct of basic or applied research.

(ii) Development, design, or manufacture for the first time of any machine, article of manufacture, or composition of matter to satisfy NASA's specifications or special requirements.

(iii) Development of any process or technique for attaining a NASA objective not readily attainable through the practice of a previously developed process or technique.

(iv) Testing of, evaluation of, or experimentation with a machine, process, concept, or technique to determine whether it is suitable or could be made suitable for a NASA objective.

(v) Construction work or architect-engineer services having as a purpose the performance of experimental, developmental, or research work or test and evaluation studies involving such work.

(vi) The operation of facilities or the coordination and direction of the work of others, if these activities involve performing work of any of the types described in paragraphs (i) through (v) of this section.

NEW TECHNOLOGY—OTHER THAN A SMALL BUSINESS FIRM OR NONPROFIT ORGANIZATION (APR 2015)

(a) Definitions. As used in this clause—

"Administrator" means the Administrator of the National Aeronautics and Space Administration (NASA) or duly authorized representative.

"Contract" has the meaning provided in the Federal Acquisition Regulation (FAR), Subpart 2.1-Definitions.

"Made" means—

    (1) When used in relation to any invention other than a plant variety, the conception or first actual reduction to practice of the invention; or

    (2) When used in relation to a plant variety, that the Contractor has at least tentatively determined that the variety has been reproduced with recognized characteristics.

"Nonprofit organization" means a domestic university or other institution of higher education or an organization of the type described in section 501(c)(3) of the Internal Revenue Code of 1954 (26 U.S.C. 501(c)) and exempt from taxation under section 501(a) of the Internal Revenue Code (26 U.S.C. 501(a)), or any domestic nonprofit scientific or educational organization qualified under a State nonprofit organization statute.

"Practical application" means to manufacture, in the case of a composition or product; to practice, in the case of a process or method; or to operate, in the case of a machine or system; and, in each case, under such conditions as to establish that the invention is being utilized and that its benefits are, to the extent permitted by law or Government regulations, available to the public on reasonable terms.

"Reportable item" means any invention, discovery, improvement, or innovation of the contractor, whether or not patentable or otherwise protectable under Title 35 of the United States Code, made in the performance of any work under any NASA contract or in the performance of any work that is reimbursable under any clause in any NASA contract providing for reimbursement of costs incurred before the effective date of the contract. Reportable items include, but are not limited to, new processes, machines, manufactures, and compositions of matter, and improvements to, or new applications of, existing processes, machines, manufactures, and compositions of matter. Reportable items also include new computer programs, and improvements to, or new applications of, existing computer programs, whether or not copyrightable or otherwise protectable under Title 17 of the United States Code.

"Small business firm" means a domestic small business concern as defined at 15 U.S.C. 632 and implementing regulations of the Administrator of the Small Business Administration. (For the purpose of this definition, the criteria and size standard adopted in the FAR Subpart 2.1 definitions for “small business concern” and for “small business subcontractor” will be used.)

"Subject invention" means any reportable item which is or may be patentable or otherwise protectable under Title 35 of the United States Code, or any novel variety of plant that is or may be protectable under the Plant Variety Protection Act (7 U.S.C. 2321, et seq.).

(b) Allocation of principal rights.

    (1) Presumption of title.

        (i) Any reportable item that the Administrator considers to be a subject invention shall be presumed to have been made in the manner specified in paragraph (1)(A) or (1)(B) of Section 20135(b) of the National Aeronautics and Space Act (51 U.S.C. 20135(b)) (hereinafter "the Act"), and the above presumption shall be conclusive unless at the time of reporting the reportable item in accordance with paragraph (e)(2) of this clause the Contractor submits to the Contracting Officer a written statement, containing supporting details, demonstrating that the reportable item was not made in the manner specified in the Act.

        (ii) Regardless of whether title to a given subject invention would otherwise be subject to an advance waiver or is the subject of a petition for waiver as described in paragraph (b)(3) of this clause, the Contractor may nevertheless file the statement described in paragraph (b)(1)(i) of this clause. The Administrator will review the information furnished by the Contractor in any such statement and any other available information relating to the circumstances surrounding the making of the subject invention and will notify the Contractor whether the Administrator has determined that the subject invention was made in the manner specified in paragraph (1)(A) or (1)(B) of Section 20135(b) of the Act.

    (2) Property rights in subject inventions. Each subject invention for which the presumption of paragraph (b)(1)(i) of this clause is conclusive or for which there has been a determination that it was made in the manner specified in paragraph (1)(A) or (1)(B) of Section 20135(b) of the Act shall be the exclusive property of the United States as represented by NASA unless the Administrator waives all or any part of the rights of the United States, as provided in paragraph (b)(3) of this clause.

    (3) Waiver of rights.

        (i) Section 20135(g) of the Act provides for the promulgation of regulations by which the Administrator may waive all or any part of the rights of the United States with respect to any invention or class of inventions made or that may be made under conditions specified in paragraph (1)(A) or (1)(B) of Section 20135(b) of the Act. The promulgated NASA Patent Waiver Regulations, 14 CFR Part 1245, Subpart 1, provide procedures for the Contractor to submit petitions (requests) for waiver of rights and guidance for NASA in acting on petitions for such waiver of rights.

        (ii) As provided in 14 CFR 1245, Subpart 1, the Contractor may petition, either prior to execution of the contract or within 30 days after execution of the contract, for advance waiver of rights to any invention or class of inventions that may be made under a contract. If such a petition is not submitted, or if after submission it is denied, the Contractor (or an employee inventor of the Contractor) may petition for waiver of rights to an identified subject invention within eight months of first disclosure of invention in accordance with paragraph (e)(2) of this clause, or within such longer period as may be authorized in accordance with 14 CFR 1245.105.

(c) Minimum rights reserved by the Government.

    (1) With respect to each subject invention for which a waiver of rights has been granted, the Government reserves--

        (i) An irrevocable, nonexclusive, nontransferable, royalty-free license for the practice of such invention throughout the world by or on behalf of the United States or any foreign government in accordance with any treaty or agreement with the United States; and

        (ii) Such other rights as stated in 14 CFR 1245.107.

    (2) Nothing contained in this paragraph (c) shall be considered to grant to the Government any rights with respect to any invention other than a subject invention.

(d) Minimum rights to the Contractor.

    (1) The Contractor is hereby granted a revocable, nonexclusive, royalty-free license in each patent application filed in any country on a subject invention in which the Government has title and in any resulting patent, unless the Contractor fails to disclose the subject invention within the times specified in paragraph (e)(2) of this clause. The Contractor's license extends to its domestic subsidiaries and affiliates, if any, within the corporate structure of which the Contractor is a party and includes the right to grant sublicenses of the same scope to the extent the Contractor was legally obligated to do so at the time the contract was awarded. The license is transferable only with the approval of the Administrator except when transferred to the successor of that part of the Contractor's business to which the invention pertains.

    (2) The Contractor's domestic license may be revoked or modified by the Administrator to the extent necessary to achieve expeditious practical application of the subject invention pursuant to an application for an exclusive license submitted in accordance with 37 CFR Part 404, Licensing of Government Owned Inventions. The Contractor’s license will not be revoked in that field of use or the geographical areas in which the Contractor has achieved practical application and continues to make the benefits of the invention reasonably accessible to the public. The license in any foreign country may be revoked or modified at the discretion of the Administrator to the extent the Contractor, its licensees, or its domestic subsidiaries or affiliates have failed to achieve practical application in that foreign country.

    (3) Before revoking or modifying the Contractor’s license, the Contractor will be provided a written notice of the Administrator's intention to revoke or modify the license, and the Contractor will be allowed 30 days (or such other time as may be authorized by the Administrator for good cause shown) after the notice to show cause why the license should not be revoked or modified. The Contractor has the right to appeal to the Administrator any decision concerning the revocation or modification of its license.

(e) Contractor’s obligations.

    (1) The Contractor shall establish and maintain active and effective procedures to assure that reportable items are promptly identified and disclosed to Contractor personnel responsible for the administration of this New Technology-Other than a Small Business Firm or Nonprofit Organization clause within six months of conception and/or first actual reduction to practice, whichever occurs first in the performance of work under this contract. These procedures shall include the maintenance of laboratory notebooks or equivalent records and other records as are reasonably necessary to document the conception and/or the first actual reduction to practice of the reportable items, and records that show that the procedures for identifying and disclosing reportable items are followed. Upon request, the Contractor shall furnish the Contracting Officer a description of such procedures for evaluation and for determination as to their effectiveness.

    (2) The Contractor shall disclose in writing each reportable item to the Contracting Officer within two months after the inventor discloses it in writing to Contractor personnel responsible for the administration of this New Technology-Other than a Small Business Firm or Nonprofit Organization clause or within six months after the Contractor becomes aware that a reportable item has been made, whichever is earlier, but in any event for subject inventions before any on sale, public use, or publication of such invention known to the Contractor. The disclosure to the agency shall identify the inventor(s) or innovator(s) and this contract under which the reportable item was made. It shall be sufficiently complete in technical detail to convey a clear understanding, to the extent known at the time of the disclosure, of the nature, purpose, operation, and physical, chemical, biological, or electrical characteristics of the reportable item. The disclosure shall also identify any publication, sale or offer for sale, or public use of any subject invention and whether a manuscript describing such invention has been submitted for publication and, if so, whether it has been accepted for publication at the time of disclosure. In addition, after disclosure to the agency, the Contractor will promptly notify the agency of the acceptance of any manuscript describing a subject invention for publication or of any sale, offer for sale, or public use planned by the Contractor for such invention.

    (3) The Contractor may use whatever format is convenient to disclose reportable items required in subparagraph (e)(2). NASA prefers that the Contractor use either the electronic or paper version of NASA Form 1679, Disclosure of Invention and New Technology (including computer software) to disclose reportable items. Both the electronic and paper versions of NASA Form 1679 may be accessed at the electronic New Technology Reporting Web site http://invention.nasa.gov.

    (4) The Contractor shall furnish the Contracting Officer the following:

        (i) Interim new technology summary reports every 12 months (or such longer period as may be specified by the Contracting Officer) from the date of the contract, listing reportable items during that period, and certifying that all reportable items have been disclosed (or that there are no such inventions).

        (ii) A final new technology summary report, within 3 months after completion of the contracted work, listing all reportable items or certifying that there were no such reportable items, and listing all subcontracts at any tier containing a patent rights clause or certifying that there were no such subcontracts.

    (5) The Contractor agrees, upon written request of the Contracting Officer, to furnish additional technical and other information available to the Contractor as is necessary for the preparation of a patent application on a subject invention and for the prosecution of the patent application, and to execute all papers necessary to file patent applications on subject inventions and to establish the Government's rights in the subject inventions.

    (6) The Contractor agrees, subject to paragraph 27.302(j) of the Federal Acquisition Regulation (FAR), that the Government may duplicate and disclose subject invention disclosures and all other reports and papers furnished or required to be furnished pursuant to this clause.

(f) Examination of records relating to inventions.

    (1) The Contracting Officer or any authorized representative shall, until 3 years after final payment under this contract, have the right to examine any books (including laboratory notebooks), records, and documents of the Contractor relating to the conception or first actual reduction to practice of inventions in the same field of technology as the work under this contract to determine whether--

        (i) Any such inventions are subject inventions;

        (ii) The Contractor has established and maintained the procedures required by paragraph (e)(1) of this clause; and

        (iii) The Contractor and its inventors have complied with the procedures.

    (2) If the Contracting Officer learns of an unreported Contractor invention that the Contracting Officer believes may be a subject invention, the Contracting Officer may require the Contractor to disclose the invention to the agency for a determination of ownership rights.

    (3) Any examination of records under this paragraph will be subject to appropriate conditions to protect the confidentiality of the information involved.

(g) Withholding of payment (this paragraph does not apply to subcontracts).

    (1) Any time before final payment under this contract, the Contracting Officer may, in the Government's interest, withhold payment until a reserve not exceeding $50,000 or 5 percent of the amount of this contract, whichever is less, shall have been set aside if, in the Contracting Officer's opinion, the Contractor fails to--

        (i) Establish, maintain, and follow effective procedures for identifying and disclosing reportable items pursuant to paragraph (e)(1) of this clause;

        (ii) Disclose any reportable items pursuant to paragraph (e)(2) of this clause;

        (iii) Deliver acceptable interim new technology summary reports pursuant to paragraph (e)(4)(i) of this clause or a final new technology summary report pursuant to (e) (4) (ii); or

        (iv) Provide the information regarding subcontracts pursuant to paragraph (h)(4) of this clause.

    (2) Such reserve or balance shall be withheld until the Contracting Officer has determined that the Contractor has rectified whatever deficiencies exist and has delivered all reports, disclosures, and other information required by this clause.

    (3) Final payment under this contract shall not be made before the Contractor delivers to the Contracting Officer all disclosures of reportable items required by paragraph (e)(2) of this clause, and an acceptable final new technology summary report pursuant to paragraph (e)(4)(ii) of this clause.

    (4) The Contracting Officer may decrease or increase the sums withheld up to the maximum authorized above. No amount shall be withheld under this paragraph while the amount specified by this paragraph is being withheld under other provisions of the contract. The withholding of any amount or the subsequent payment thereof shall not be construed as a waiver of any Government rights.

(h) Subcontracts.

    (1) Unless otherwise authorized or directed by the Contracting Officer, the Contractor shall—

        (i) Include this clause (suitably modified to identify the parties) in any subcontract hereunder (regardless of tier) with other than a small business firm or nonprofit organization for the performance of experimental, developmental, or research work; or

        (ii) Include the clause at FAR 52.227-11, as modified by 1852.227-11, (suitably modified to identify the parties) in any subcontract hereunder (regardless of tier) with a small business firm or nonprofit organization for the performance of experimental, developmental, or research work; and

        (iii) Modify the applicable clause in any subcontract hereunder (regardless of tier) to identify the parties as follows: references to the Government are not changed, and in all references to the Contractor, the subcontractor is substituted for the Contractor so that the subcontractor has all rights and obligations of the Contractor in the clause.

    (2) In the event of a refusal by a prospective subcontractor to accept such a clause the Contractor—

        (i) Shall promptly submit a written notice to the Contracting Officer setting forth the subcontractor's reasons for such refusal and other pertinent information that may expedite disposition of the matter; and

        (ii) Shall not proceed with such subcontract without the written authorization of the Contracting Officer.

    (3) In the case of subcontracts at any tier, the agency, subcontractor, and Contractor agree that the mutual obligations of the parties created by this clause constitute a contract between the subcontractor and NASA with respect to those matters covered by this clause.

    (4) The Contractor shall promptly notify the Contracting Officer in writing upon the award of any subcontract hereunder (regardless of tier) by identifying the subcontractor, the applicable patent rights clause in the subcontract, the work to be performed under the subcontract, and the dates of award and estimated completion. Upon request of the Contracting Officer, the Contractor shall furnish a copy of such subcontract, and, no more frequently than annually, a listing of the subcontracts that have been awarded.

    (5) The subcontractor will retain all rights provided for the Contractor in the clause of subparagraph (h)(1)(i) or (ii) of this clause, whichever is included in the subcontract, and the Contractor will not, as part of the consideration for awarding the subcontract, obtain rights in the subcontractor's subject inventions.

(i) Preference for United States industry. Unless provided otherwise, no Contractor that receives title to any subject invention and no assignee of any such Contractor shall grant to any person the exclusive right to use or sell any subject invention in the United States unless such person agrees that any products embodying the subject invention will be manufactured substantially in the United States. However, in individual cases, the requirement may be waived by the Administrator upon a showing by the Contractor or assignee that reasonable but unsuccessful efforts have been made to grant licenses on similar terms to potential licensees that would be likely to manufacture substantially in the United States or that under the circumstances domestic manufacture is not commercially feasible.

(End of clause)
 

(h) Subcontracts. (1) Unless otherwise authorized or directed by the Contracting Officer, the Contractor shall— (i) Include this clause (suitably modified to identify the parties) in any subcontract hereunder (regardless of tier) with other than a small business firm or nonprofit organization for the performance of experimental, developmental, or research work; or (ii) Include the clause at FAR 52.227-11, as modified by 1852.227-11, (suitably modified to identify the parties) in any subcontract hereunder (regardless of tier) with a small business firm or nonprofit organization for the performance of experimental, developmental, or research work; and (iii) Modify the applicable clause in any subcontract hereunder (regardless of tier) to identify the parties as follows: references to the Government are not changed, and in all references to the Contractor, the subcontractor is substituted for the Contractor so that the subcontractor has all rights and obligations of the Contractor in the clause. (2) In the event of a refusal by a prospective subcontractor to accept such a clause the Contractor— (i) Shall promptly submit a written notice to the Contracting Officer setting forth the subcontractor's reasons for such refusal and other pertinent information that may expedite disposition of the matter; and (ii) Shall not proceed with such subcontract without the written authorization of the Contracting Officer. (3) In the case of subcontracts at any tier, the agency, subcontractor, and Contractor agree that the mutual obligations of the parties created by this clause constitute a contract between the subcontractor and NASA with respect to those matters covered by this clause. (4) The Contractor shall promptly notify the Contracting Officer in writing upon the award of any subcontract hereunder (regardless of tier) by identifying the subcontractor, the applicable patent rights clause in the subcontract, the work to be performed under the subcontract, and the dates of award and estimated completion. Upon request of the Contracting Officer, the Contractor shall furnish a copy of such subcontract, and, no more frequently than annually, a listing of the subcontracts that have been awarded. (5) The subcontractor will retain all rights provided for the Contractor in the clause of subparagraph (h)(1)(i) or (ii) of this clause, whichever is included in the subcontract, and the Contractor will not, as part of the consideration for awarding the subcontract, obtain rights in the subcontractor's subject inventions.

Mandatory (Exception);
Small business ✖ Not a major defense system ✖ Outside U.S. ✖ Non-R&D ✖ 

52.227-1 Authorization and Consent.

52.227-10 Filing of Patent Applications—Classified Subject Matter.

52.227-11 Patent Rights—Ownership by the Contractor.

52.227-13 Patent Rights—Ownership by the Government.

52.227-14 Rights in Data—General.

52.227-15 Representation of Limited Rights Data and Restricted Computer Software.

52.227-16 Additional Data Requirements.

52.227-17 Rights in Data—Special Works.

52.227-19 Commercial Computer Software License.

52.227-2 Notice and Assistance Regarding Patent and Copyright Infringement.

52.227-20 Rights in Data—SBIR Program.

52.227-21 Technical Data Declaration, Revision, and Withholding of Payment—Major Systems.

52.227-22 Major System—Minimum Rights.

52.227-23 Rights to Proposal Data (Technical).

52.227-3 Patent Indemnity.

52.227-4 Patent Indemnity—Construction Contracts.

52.227-6 Royalty Information.

52.227-7 Patents—Notice of Government Licensee.

52.227-9 Refund of Royalties.

252.217-7026 Identification of Sources of Supply.

252.227-7000 Non-Estoppel.

252.227-7001 Release of Past Infringement.

252.227-7002 Readjustment of Payments.

252.227-7003 Termination.

252.227-7004 License Grant.

252.227-7005 License Term.

252.227-7006 License Grant---Running Royalty.

252.227-7007 License Term--Running Royalty.

252.227-7008 Computation of Royalties.

252.227-7009 Reporting and Payment of Royalties.

252.227-7010 License to Other Government Agencies.

252.227-7011 Assignments.

252.227-7013 Rights in Technical Data--Noncommercial Items.

252.227-7014 Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation.

252.227-7015 Technical Data–Commercial Items.

252.227-7016 Rights in Bid or Proposal Information.

252.227-7017 Identification and Assertion of Use, Release, or Disclosure Restrictions.

252.227-7018 Rights in Noncommercial Technical Data and Computer Software--Small Business Innovation Research (SBIR) Program.

252.227-7019 Validation of Asserted Restrictions--Computer Software.

252.227-7020 Rights in Special Works.

252.227-7021 Rights in Data--Existing Works.

252.227-7022 Government Rights (Unlimited).

252.227-7023 Drawings and Other Data to Become Property of Government.

252.227-7024 Notice and Approval of Restricted Designs.

252.227-7025 Limitations on the Use or Disclosure of Government-Furnished Information Marked with Restrictive Legends.

252.227-7026 Deferred Delivery of Technical Data or Computer Software.

252.227-7027 Deferred Ordering of Technical Data or Computer Software.

252.227-7028 Technical Data or Computer Software Previously Delivered to the Government.

252.227-7032 Rights in Technical Data and Computer Software (Foreign).

252.227-7037 Validation of Restrictive Markings on Technical Data.

252.227-7038 Patent Rights—Ownership by the Contractor (Large Business).

252.227-7039 Patents--Reporting of Subject Inventions.

252.246-7001 Warranty of Data.

1852.227-11 Patent Rights--Retention by the Contractor (Short Form).

1852.227-14 Rights in Data--General.

1852.227-19 Commercial Computer Software--Restricted Rights.

1852.227-71 Requests for Waiver of Rights to Inventions.

1852.227-72 Designation of New Technology Representative and Patent Representative.

1852.227-84 Patent Rights Clauses.

1852.227-85 Invention Reporting and Rights--Foreign.

1852.227-86 Commercial Computer Software--Licensing.

1852.227-88 Government-furnished computer software and related technical data.

5252.246-9514 INSPECTION AND ACCEPTANCE OF TECHNICAL DATA AND INFORMATION (NAVAIR)(FEB 1995)

5252.247-9505 TECHNICAL DATA AND INFORMATION (NAVAIR)(FEB 1995)

5252.227-9512 TRADEMARK MANUFACTURE/USE LICENSE AGREEMENT (NAVAIR)

5252.227-9501 Invention Disclosures and Reports (NAVAIR) (May 1998)

5252.227-9511 Disclosure, Use and Protection of Proprietary Information (NAVAIR) (Feb 2009)

5252.227-9216 Pre-award Identification and Assertion of Restrictions on Technical Data Pertaining to a Commercial Item and Commercial Computer Software

552.227-70 Government Rights (Unlimited).

552.227-71 Drawings and Other Data to Become Property of Government.

752.227-14 Rights in Data—general.

752.227-70 Patent reporting procedures.

Working with a set of FAR clauses from an RFP or contract?

Try pasting them into our tool to instantly generate a risk profile, including the basic flow down recommendation.

Info

Works best with Chrome and Edge browsers!